1975 Chevy Nova
Page 2
Checking the fit before the cutting Begins Looks good lets paint it Wow that was fast lets cut more
one side done and the lights are out the other sides out Second Quarter is installed
Look What was NOT under the Carpet An old fiberglass Patch all the old Rust is cut out
both sides of the trunk the Missing metal New used Trunk Lid
Quarter Panels are installed with cleco's after it was riveted into Place and the first bondo wow a new trunk floor thanks Santa
What a mess The Rust is All gone New trunk and a bondo seal around the Quarter
The new trunk works installing and manufacturing metal to replace old metal
Cleaned all the rust away from the surface Brian is still struggling "3rd day " 8"X18" Patch bondo to strengthen the patch
found some rust by the shock mount so we cut it out and patched it all primed and ready for paint day 6 Brian is almost done
All riveted in and ready for the fiberglass and bondo
All riveted in and ready for the fiberglass and bondo
well we needed a break from the body work so we installed a new crane 440 energizer cam in our 283
well we needed a break from the body work so we installed a new crane 440 energizer cam in our 283
well God decided to rain us all weekend so while we had the front end off we replaced the support arm bushings and ball joints
1 done 1 to go nasty we will have to clean this up well sand and polish prime and paint then clear
well sand and polish prime and paint then clear
well sand and polish prime and paint then clear
well sand and polish prime and paint then clear
well sand and polish prime and paint then clear this is the front end torn off
close up of the fabrication work on the quarter.
Below is the new color of the 1975 nova project.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10
Page 11 Page 12 Page13 Page 14 Page15 Page 16 Page 17 Page 18 Page 19