FACIT 4047 READER PUNCH
The compact and rugged design of the low-noise 60dB) Facit 4047 Reader/Punch combination, makes it ideal in both mobile and stationary NC or CNC applications. Communication parameters, automatic EIA/ISO/ASCII and Telex code conversions and input controls for NC and CNC tape handling are easily micro-processor controlled from the keyboard and display.
NC-equipment and host computer are integrated by means of two standard serial interfaces. The two-way, handshaking communication is optimized by a buffer with a capacity of more than 3,000 characters.
Punching is performed at a speed of 60 characters per second and reading at 120 characters per second. Both punching and reading speed can be selected from the keyboard on 4047.
| 4047 Punching speed | 0-60 characters per second |
| 4047 Reading speed | Max 120 characters per second, optical |
| Tape widths | 5-8 channels: 25.4 mm (1 inch) |
| Type of Tape | Un-oiled paper tape or Mylar |
| Tape Material | Any tape with a transmissibility of up to 60% |
| Interfaces | Two serial interfaces. V24/RS-232C |
| Transmission speed from 110 to 4800 Baud | |
| TTY Current Loop available as option (5165) | |
| Input Buffer | Approximately 3000 character buffer |
| sharable between the two channels | |
| Protocols | Ready/Busy and XON/XOFF (DC1/DC3) |
| Start/Stop-Codes | DC1/DC3 - reading and DC2/DC4 - punching |
| Code Conversion | ASCII/ISO/EIA and Random (transparent) |
| code, Telex-code (5 channels) | |
| Supply Voltages | 100/115/220/240 V switch-able+15%-10% |
| Power Consumption | Maximum 200 Watts |
| Width/Depth/Height/Weight | 8.62" x 20.5" x 7.88" 29 lbs |