Chassis and brakes:
 |
Frame stripped, sandblasted, repainted. |
|
New rear frame cross-members |
|
New TPI suspension (springs, shocks, shackles, frame pins) |
|
Axles sandblasted and repainted. |
|
Knuckle rebuild, new tie rod ends, new rotors and master cylinder, new tires (less than 2K miles) |
|
New stainless hard brake lines, new stainless braided brake hoses. |
Motor:
|
Stripped and repainted. |
|
New gaskets and seals. |
|
Valve cover polished. |
|
New: Alternator, Water Pump, Fuel Pump, Fan Clutch, Headers (w/ceramic coating), motor mounts. |
|
Less than 2K miles: Radiator, Carb, Starter, muffler, tailpipe. |
Transmission / Transfer Case /Clutch:
|
Rebuilt transmission and transfer case (bearings, seals, gaskets) |
|
Glass bead blasted transfer case. |
|
Stripped and repainted transmission case. |
|
New clutch kit: Pressure plate, master cylinder, slave cylinder, clutch hose. |
|
Resurfaced flywheel. |
|
Speedometer cable, rebuilt parking brake drum (less than 2K miles) |
Body:
|
Cowl and windshield frame acid dip and e-coat primed. |
|
New Aqualu aluminum tub. |
|
CCOT rear door lower skins (tacked in place). |
|
New Toyota factory front fenders and running boards. |
Interior, Trim, Misc:
|
Recovered front seats and new drivers-side bottom foam. |
|
New Toyota factory windshield. |
|
New aftermarket wiring harness. |
|
New: Dash, Tuffy console and mount, shift and transfer case knobs, Toyota factory emblems, jumpseat covers, etc. I have a LOT of new parts ready for assembly. Please check the "parts list" page. |
