- Usual 12 second mods; 160 thermostat, throttle body water ports
blocked, adj. FP reg., etc.
- .040 Over TRW Forged Pistons
- Stock CAM
- Stock throttle body
- Heads – mild porting (self) and O-ringed (Weber Racing)
- GM Head Gaskets w/GM Head Bolts
- 55# injectors
- TE60 Turbo w/PTE .63 Exhaust Housing
- 9" KN mounted outside of engine compartment
- RA Volt booster
- RA dual XPs, hot wired
- TH 3" DP
- CAS Front Mount IC
- Both MAF screen removed
- Headers – cleaned up, matched to heads and pinned
- Precision 7 disc lock up
- Boxed lower control arms
- S-10 Whl Cyls
- Soft rear shoes
- 2 air bags
- Snubber
- Koni SPA1 front shocks
- Front sway bar retained
- Battery mounted in trunk
Results – 10.95 @ 124 mph
26 pounds boost, 1.53 sixty foot w/12 pound launch,
Hoosier 9 x 26 slicks mounted on 8.5 Convo Pros,
Maximol race fuel and through Cotton's 3" single exhaust.