TrueX™ 40X  CD-ROM Drive Kit

Features:  Patented TrueX Multibeam Technology No Hard Disk Caching 6 MB/sec Max data transfer rate Internal ATAPI/E-IDE Interface Optimized for UDMA Compatible with ALL CD formats High speed audio extraction Vertical mount function Multi-read function Complies with MPC-3 Low vibration and low noise Emergency Manual Eject Kit Includes:    40X TrueX CD-ROM drive Audio cable Data cable Drivers Manual One year warranty   Drive Specifications Drive Interface EIDE Disc Loading Tray Disc Readable Formats CD-ROM (Mode 1 & 2) CD-ROM/XA (Mode 2, Form 1 & 2) CD-R, CD-Extra (CD+) Photo-CD (Single & Multi-Sessions) Video CD, Karaoke CD CD-I/MPEG, CD-WO, I-TRAX CD Disc Diameter 12cm Sustained Data Transfer Rate 6MB/s Burst Data Transfer Rate 16.6MB/sec Average Random Access  Less than 90ms Data Buffer 2048KB Eject Button Motorized Eject Button, Emergency Button  LED Disc Activity  Headphone Jack Stereo 3.5mm Mini-Jack Volume Control Wheel Knob Interface Connector 40-Pin EIDE Header CD-Audio Analog Out Supported Digital Audio Out Supported EIDE Settings EIDE drives have Master/Slave Jumpers.  General Specifications Installation Orientation Horizontal Dimensions(W/H/D) 5.9"x1.7"x7.9" Weight 3.5lbs Power Supply DC+5V ,1.2A ,1.5A peak   DC+12V, 0.5A, 1.5A peak Reliability MTBF 100,000 Power On Hours at 25% duty cycle Warranty One Year Warranty System Requirements Minimum  IBM PC  486/66 or higher Pentium class recommended  Open half-height 5.25"  Windows 95 or higher  16MB RAM required  3.5" floppy drive