FEATURES & BENEFITS
0.26mm true dot pitch
(0.22H, 0.14V mm)
This super fine dot pitch produces clear, crisp images with great picture
definition, even at the highest resolutions.
1,600 x 1,280 maximum resolution
Displays a maximum resolution of 1,600 x 1,280; 1,280 x 1,024 at 88Hz
flicker-free refresh rate for easy viewing.
-
1,600 x 1,200 NI @ 76Hz
-
1,280 x 1,024 NI @ 88Hz
-
1,024 x 768 NI @ 116Hz
-
800 x 600 NI @ 146Hz
OnView® Controls including ViewMatch®
All screen adjustments are made via an on-screen menu using simple
controls. ViewMatch allows the user to adjust color temperature and individual
color intensity for screen-to-print matching.
ARAG® screen treatment
This specially formulated anti-reflection, anti-glare screen treatment
uses a multi-layer process to refract unwanted light away from the user
while maintaining the highest quality of the displayed image.
SuperContrast™ screen
By incorporating glass with a lower transmission rate, bright bold
colors are assured. The pixels are well defined, creating greater contrast
and more brilliant colors.
Invar shadow mask
This special type of alloy withstands higher heat levels, extending
the picture tube life while displaying sharp, bright pictures.
TCO '95 and NUTEK certified
This monitor complies with the world's strictest standards for low
radiation, safety, ergonomics, recycling and power management while saving
costs through automatic power saving modes. |
19" (18.0" viewable) GRAPHICS SERIES MONITOR
WITH Plug & Play+
Model No. VCDTS21385-1M/1E/1A |
|
CRT |
Type |
19" (18.0" diagonal viewable area),
0.26mm true dot pitch, 90°deflection |
Phosphor |
RGB medium persistence |
Glass Surface |
Tint (TM=46%), ARAG® screen treatment |
|
INPUT SIGNAL |
Video |
RGB Analog (0.714Vp-p, 75 ohms) |
Sync |
H/V Separate (TTL), composite, sync-on-green |
Frequency |
Fh:30-95kHz, Fv:50-180Hz |
|
COMPATIBILITY |
PC |
IBM® XT, AT, 386, 486, Pentium®
or PS/2 and compatible (from VGA up to 1,600 x 1,280 non-interlaced) |
Mac* |
Power Mac® (up to 1600 x 1200) |
|
CONNECTOR |
Signal |
15-pin mini D-sub, attached cable |
Power |
3-pin plug (IEC320) |
|
POWER |
Voltage |
AC 88-132V/180-264V (auto switch) 50/60 Hz |
Consumption |
135W (Typical) |
|
USER CONTROLS |
Basic |
Power on/off, Key-1, Key-2, down, up |
OnView® |
Contrast, brightness, H/V-position, H/V-size, pincushion,
degauss, pin-balance, trapezoid, ViewMatch® color,
parallelogram, tilt, ViewMeter®, language, select,
recall, OSD position, moiré |
|
VIDEO INPUT |
Bandwidth |
200MHz (Typical) |
|
MISCONVERGENCE |
|
0.3mm (max) at center |
|
0.4mm (max) at corner |
|
DISPLAY AREA
(Dependent upon signal timing used) |
Factory Setting |
360mm (H) x 270mm (V) |
Maximum Scan |
365mm (H) x 275mm (V) |
|
OPERATING CONDITION |
Temperature |
32°F to 104°F (0°C to 40°C) |
Humidity |
5% to 95% (non-condensing) |
|
DIMENSIONS |
Physical |
452mm (W) x 450mm (H) x 465mm (D)
(17.8" x 17.7" x 18.3") |
|
WEIGHT |
Net |
22Kg (48.4 lbs.) |
|
OTHER |
|
DDC1 & DDC2B |
|
REGULATIONS |
|
UL, CSA, FCC-B, DHHS, MPR-II, ISO9241-3, TUV, PTB, VCCI-II,
DOC-B, EN60950:1992, NEMKO, DEMKO, FEMKO, SEMKO, NUTEK, CE, C-Tick |
|
POWER MANAGEMENT |
|
Meets Energy Star®, VESA®
DPMS™, NUTEK and TCO '95 standards. |
|
WARRANTY |
|
Three year limited warranty on CRT, parts and labor
48 hour Express ExchangeSM Service
option available |
|
|