|
|
llll |
ITEM#655603N
Key Characteristics |
P72 17" CRT (16" Viewable) |
|
Features & Benefits
l |
Anti-Reflective Surface - Superior
anti-reflective screen treatments on all IBM monitors virtually eliminate
annoying glare for the user, without sacrificing brightness or color.
Asset management - IBM Monitors' VESA DDC Plug and Play
capability enables asset management function when coupled with appropriate
software, such as IBM Netfinity Manager.
Enhanced User Comfort - IBM keeps users in mind through
compliance to comprehensive worldwide standards for front-of-screen ergonomics
and low emissions, and by simplifying initial setup and use.
Compatibility - IBM monitors allow you to take advantage
of virtually every major video standard that your IBM or IBM-compatible
system utilizes.
ISO Compliance - All monitors provide ISO 9241 Part 3
compliance, the international standard for monitor front-of-screen ergonomics,
so our monitors are exceptionally easy on the eyes. (ISO compliance requires
complete ISO-capable platform of system unit)
Multi-language on-screen display - The microprocesor-based,
multi-language On-Screen Display (OSD) combined with the digital controls
gives you full control over: picture position, size, shape, and alignment;
brightness and contrast; color tint control; tilt; degauss and you see
the immediate effect of user control adjustments.
Plug and Play - IBM's VESA DDC Plug and Play capability
provides automatic display mode optimization when the monitor is attached
to a DDC-enabled system.
Superior images - All of IBM's monitors feature exceptionally
bright, clear images. The P Series even goes a step further, with Sony
Trinitron tube technology built into each model.
Power Management - Power management feature cuts energy
usage, while prolonging the life of the monitor. Meets and exceeds Energy
Star requirements and Swedish NUTEK standards.
Reliability and Support - IBM backs these monitors with
a three-year limited warranty and toll-free technical support.
User controls - Intuitive digital controls allow you to
configure precise viewing for each user preference. |
Compatibility
ll |
Restrictions: |
-Not all available display modes run at
the high refresh rates necessary for flicker-free performance. Display
modes at lower refresh rates are available for compatibility with older
graphics adapters and system units., -Supported display modes are a function
of the attaching system unit. The full range of display modes available
with these monitors may not be available or supported with all combinations
of system units, their operating systems, and application software., -Horizontal
and vertical sync signal timings are critical in order to achieve acceptable
screen images. As a consequence, support for all possible variations in
H/V sync timings for any display mode cannot be stated., -The number of
colors shown in any display mode is not limited by the monitor but depends
upon the capabilities of the adapter the monitor is attached to., -Power
factor correction is only effective during normal operation and not effective
during power management., -The power management function is invoked only
after initiating signals are received from the attached system unit or
graphics adapter. The method used to implement power management follows
the Video Electronics Standard Association (VESA) Display Power Management
Signaling (DPMS) standard. This standard must also be implemented in the
attaching system unit and/or graphics adapter for monitor power management
to be effective., -Implementation of monitor Plug and Play follows the
Video Electronics Standards Association (VESA) Display Data Channel (DDC)
standard. This standard must also be implemented in the attaching system
unit hardware and software to be effective. Not all system units are DDC-enabled.
In this situation, the user is required to perform the configuration necessary
to obtain optimum performance from the system/graphic adapter/monitor combination. |
|
Hardware prerequisites:
System Units |
|
_ IBM Systems: |
PC 300XL, PC 300PL, PC 300PL Pentium II
models, PC 300GL, PC 300GL Celeron models, PC 300GL Pentium II models,
PC 300GL Small Business Series, Netfinity 3500, PC Server 310 200MHz models,
PC Server 325 Pentium II models, PC Server 325 Rack Mounted Pentium II
models, PC Server 330 Pentium II models |
|
_ Non-IBM systems: |
P72 Monitor is designed to operate with
system units or graphic adapters that generate a video output signal that
falls within the specifications below:; Max Addressability (pels): 1280x1024;
Horizontal Frequency (kHz): 30-85; Vertical Frequency (Hz): 50-150 |
|
Operating system requirements: |
-- |
|
Adapters: |
-- |
|
Mounting kit etc.: |
An attached video signal cable is supplied.
It is 1.8 meters long with a 15-pin mini D-shell connector. A separate
signal cable adapter is required to provided "1010" ID bits at the monitor
interface for those systems that require ID bits. |
|
Supported software: |
Microsoft Windows 95, Microsoft Windows
NT |
|
Product approvals/certifications4: |
CE MARK (Europe), CSA C22.2 No. 950 (Canada),
DNHW (Canada), EMI (B) (Korea), EN 55022 Class B (Europe), EN 61000-3-2,
FCC Class B (US), FDA/DHHS (US), GS (Germany), ICES-003 Class B (Canada),
NOM (Mexico), PTB (Germany), SEMKO (Sweden), UL-1950 First Edition, VCCI
Class 2 (Japan) |
|
Energy Star Compliant: |
Yes |
Characteristics
ll |
Display case color: |
Pearl white |
|
Terminal Type: |
|
|
Tube type: |
Trinitron CRT |
|
Nominal screen size: |
17inches (432mm) |
|
Viewable image size: |
16inches (407mm) |
|
Maximum viewable width: |
326mm |
|
Maximum viewable height: |
242mm |
|
pixel pitch/type |
0.25mm aperture grille |
|
Anti-glare: |
Yes |
|
Anti-static: |
Yes |
|
Touch screen: |
No |
|
Tilt/swivel stand: |
Yes |
|
Screen surface treatment: |
Anti-reflective |
|
Multimedia features: |
-- |
|
Multiscanning: |
-- |
|
Number of factory presets: |
8 |
|
Number of user presets: |
10 |
|
Preset modes: |
640x480/60Hz NI, 75Hz NI, 85Hz NI; 800x600/75Hz
NI, 85Hz NI; 1024x768/75Hz NI, 85Hz NI; 1280x1024/75Hz NI |
|
Microprocessor control: |
Yes |
|
Syncing: |
-- |
|
Top flicker free VESA mode: |
1024x768 at 85Hz NI |
|
Maximum addressibility: |
1280x1024 |
|
Onscreen programming: |
Yes |
|
Self-diagnostics: |
-- |
|
Plug and play support: |
Yes |
|
Ergonomics: |
ISO 9241 Part 3, TCO-95 Environmental
Label |
|
Emissions: |
EN 61000-3-2, MPR-II, TCO-91 Emission
compliance |
|
Acoustics: |
LWAD = 4.5 Bels or less |
|
Apple/workstation compatible: |
Yes |
|
Vertical refresh rate (low; high) (Hz): |
50; 150 |
|
Maximum Horizontal frequency (low; high)
(kHz): |
30; 85 |
|
Power management features4: |
EPA Energy Star compliant
NUTEK
VESA DPMS compliant
VESA DDC1/DDC2B |
|
Power consumption: |
120Watts |
|
Video inputs (connectors): |
-- |
|
User display controls: |
Brightness, Color point adjustment, Color
point recall, Contrast, Degauss, Degauss via Power Switch, Geometry reset,
Horizontal convergence, Horizontal position, Horizontal size, Image rotation,
Moire cancellation, On-screen display, Pincushion adjustment, Selectable
color points (9300K and 5000K), Trapezoidal adjustment, Vertical convergence,
Vertical position, Vertical size, Zoom |
|
Other: |
-Runs most standard
VGA, SVGA and XGA applications without modification
-Universal voltage power supply
with power factor correction
-The factory-preset modes cannot
be overwritten, but any of them can be adjusted to personal choice. The
new settings are stored automatically in one of the user locations and
are recalled each time that mode is used. The factory-settings for the
mode in use, if any, can be restored by operating the Geometry Reset control.
-Borderless operation
-Multi-frequency operation
-Clock Rate (Mpels/s): 135
-Year 2000 Ready
-Tilt-swivel stand characteristics:
Tilt - 5 degrees forward, 15 degrees backward; Swivel - 90 degrees (both
left and right) |
|
Warranty 3
x |
Limited Warranty period and type: |
Three year Customer Carry-in Exchange |
|
|