 |
Monitors
|
llll |
ITEM#65460AN
|
| G54 15" FST (13.7" Viewable) NH |
|
Features & Benefits
| l |
Anti-Reflective Surface - Superior
anti-reflective screen treatments on all IBM monitors virtually eliminate
annoying glare for the user, without sacrificing brightness or color.
Asset management - IBM Monitors' VESA DDC Plug and Play
capability enables asset management function when coupled with appropriate
software, such as IBM Netfinity Manager.
Enhanced User Comfort - IBM keeps users in mind through
compliance to comprehensive worldwide standards for front-of-screen ergonomics
and low emissions, and by simplifying initial setup and use.
Compatibility - IBM monitors allow you to take advantage
of virtually every major video standard that your IBM or IBM-compatible
system utilizes.
Superior images - All of IBM's monitors feature exceptionally
bright, clear images.
ISO Compliance - All monitors provide ISO 9241 Part 3
compliance, the international standard for monitor front-of-screen ergonomics,
so our monitors are exceptionally easy on the eyes. (ISO compliance requires
complete ISO-capable platform of system unit)
Lockable controls - Prevents unauthorized changing of
your preset image controls
On-Screen Display - The microprocesor-based On-Screen
Display (OSD) combined with the digital controls gives you full control
over: picture position, size, shape, and alignment; brightness and contrast;
color tint control; tilt; degauss and you see the immediate effect of user
control adjustments.
Plug and Play - IBM's VESA DDC Plug and Play capability
provides automatic display mode optimization when the monitor is attached
to a DDC-enabled system.
Power Management - Power management feature cuts energy
usage, while prolonging the life of the monitor. Meets and exceeds Energy
Star requirements and Swedish NUTEK standards.
Reliability and Support - IBM backs these monitors with
a three-year limited warranty and toll-free technical support.
User controls - Intuitive digital controls allow you to
configure precise viewing for each user preference.
USB upgradable - Offering a fast and easy way of connecting
peripherals to your system via your monitor |
Compatibility
| ll |
Restrictions: |
-Not all supported display modes run at
the high refresh rates necessary for flicker-free performance. Display
modes at lower refresh rates are available for compatibility with older
video adapters and system units and will not be ISO-compliant., -Supported
display modes are a function of the attaching system unit. The full range
of display modes available with these monitors may not be available or
supported with all combinations of systems units, their operating systems,
and application software., -Horizontal and vertical sync signal timings
are critical in order to achieve acceptable screen images. As a consequence,
support for all possible variations in H-and V-sync timings for any display
mode cannot be assumed., -Adjustment of the user controls to enlarge the
image to its maximum size requires that the signal timings of the display
mode being used fall within the monitor timings specifications., -The number
of colors shown in any dispay mode is not limited by the monitor, but depends
upon the capabilities of the video adapter in the system unit., -Implementation
of monitor power management follows the Video Electronics Standard Association
(VESA) Display Power Management Signaling (DPMS) standard. This standard
must also be implemented in the attaching system unit hardware and software
for monitor power management to be effective. The system implementation
must provide user-adjustable, power-down delay periods. The monitor power
management function is invoked only after appropriate signals are received
from an attached system unit of video adapter., -Implementation of monitor
Plug and Play follows the VESA Display Data Channel (DDC) standard. This
standard must also be implemented in the attaching system unit hardware
and software for monitor Plug and Play to be effective., -A signal cable
adapter is required to permit ISO-compliant attachment to InfoWindow II
Modular Display Stations. This adapter is supplied with all Info Windows
II 3483 and 3488 and 3489 Modular Display Stations., -Certain functions
require the system unit to be similarly configured, so all monitor functions
may not be enabled when attached to a particular system unit. |
|
Hardware prerequisites:
System Units |
|
_ IBM Systems: |
Netfinity 3000, Netfintiy 3500, Netfinity
5000, Netfinity 5000 Rack Mounted models, Netfinity 5500, Netfinity 5500
Rack Mounted models, Netfinity 5500 M10, Netfinity 5500 M10 Rack Mounted
models, Netfinity 7000, Netfinity 7000 Rack Mounted models, Netfinity 7000
M10 Rack Mounted models, PC 300GL, PC 300GL Celeron Models, PC 300GL Pentium
II Models, PC 300GL Small Business Series, PC 300PL, PC 300PL Pentium II
Models, PC 300XL, Aptiva E Series (2137, 2138, 2139, 2153), Aptiva Series
(2156), Aptiva S Series (2139), PC Server 310/200MHz, PC Server 325, PC
Server 330 |
|
_ Non-IBM systems: |
The IBM G54 color monitor is designed
to operate with system units or video adapter that generate a video output
signal that falls within the specifications below:; Maximum addressability
(pels): 1280x1024; Horizontal frequency (kHz): 30-69; Vertical frequency
(Hz): 50-120; Maximum pixel rate (Mpels/sec): 110 |
|
Operating system requirements: |
-- |
|
Adapters: |
-- |
|
Mounting kit etc.: |
A signal cable adapter is required to
permit ISO-compliant attachment to3483, 3488 and 3489 InfoWindow II Modular
Display Stations. |
|
Supported software: |
-- |
|
Product approvals/certifications4: |
BCIQ, CCIB/CCEE (China), CE, CSA, DEMKO,
DNHW (Canada), EN 55022 Class B (Europe), EZU (Czech), FCC Class B (US),
FDA/DHHS (US), FIMKO (Finland), GOST (Russia), GS (Germany), IC (Canada),
IEC-950 CB Report, ISO 9241-3, ISO 9241-8 , MEEI (Hungary), MPR-II, NEMKO,
NOM (Mexico), NUTEK, PCBC (Poland), PTB (Germany), SASO, SEMKO (Sweden),
SISIR (Singapore), South Africa, TUV, UL |
|
Energy Star Compliant: |
Yes |
Characteristics
| ll |
Display case color: |
Pearl white |
|
Terminal Type: |
|
|
Tube type: |
FST CRT |
|
Nominal screen size: |
15inches (381mm) |
|
Viewable image size: |
13.7inches (349mm) |
|
Maximum viewable width: |
280mm |
|
Maximum viewable height: |
210mm |
|
pixel pitch/type |
0.28mm dot |
|
Anti-glare: |
Yes |
|
Anti-static: |
Yes |
|
Touch screen: |
No |
|
Tilt/swivel stand: |
Yes |
|
Screen surface treatment: |
Multi-layer film |
|
Multimedia features: |
-- |
|
Multiscanning: |
-- |
|
Number of factory presets: |
10 |
|
Number of user presets: |
7 |
|
Preset modes: |
Mode 2 24Hz NI x 80HZ NI/75; 640Hz NI
x 480Hz NI/60,75,85; 720Hz NI x 400Hz NI/70,85; 800Hz NI x 600Hz NI/75,85;
1024Hz NI x 768H NI/75,85 |
|
Microprocessor control: |
Yes |
|
Syncing: |
Multifrequency |
|
Top flicker free VESA mode: |
1024x768 at 85Hz NI |
|
Maximum addressibility: |
1280x1024 |
|
Onscreen programming: |
Yes |
|
Self-diagnostics: |
-- |
|
Plug and play support: |
Yes |
|
Ergonomics: |
EPA Energy Star compliant (US), GS (Germany),
ISO 9241 Part 3, ISO 9241 Part 8, NUTEK, NUTEK 5W, Windows 95/98 |
|
Emissions: |
MPR-II, SWEDAC |
|
Acoustics: |
Declared acoustical noise emissions LWAD=4.5
Bels or less. |
|
Apple/workstation compatible: |
No |
|
Vertical refresh rate (low; high) (Hz): |
50; 120 |
|
Maximum Horizontal frequency (low; high)
(kHz): |
30; 69 |
|
Power management features4: |
NUTEK
VESA DPMS compliant
VESA DDC1/DDC2B |
|
Power consumption: |
100Watts |
|
Video inputs (connectors): |
-- |
|
User display controls: |
Balanced Pincushion, Brightness/contrast,
Color point recall, Color preset selection, Degauss, Digital Control, Display
Mode, Geometry reset, Horizontal position, Horizontal size, Image rotation,
Moire control, On-screen display, OSD Language selection, Parallelogram,
Pincushion adjustment, R. G. B. gain adjustment, Trapezoidal adjustment,
Vertical position, Vertical size |
|
Other: |
-Detachable tilt-swivel
base forward tilt (degrees) 4.8 max., backward tilt (degrees) 12.5 max.
Clockwise swivel (degrees) 90, Anti-clockwise swivel (degrees) 230.
-The G54 color monitor is supplied
with an attached video signal cable. This cable has the same 15-pin, D-shell
video connector for system unit connection as previous IBM general purpose
monitors.
-The factory-preset modes cannot
be overwritten, but can be adjusted to personal choice. The new settings
are stored automatically in one of the user locations and are recalled
each time that mode is used. The factory settings for the mode in use,
if any, can be restored by operating the Geometry Reset/Recall control.
-Phosphor Type: P22
-Multi-frequency operation
-Clock Rate (Mpels/sec):110
-Optimum Addressability: 800x600
-Lockable controls
-OSD shows mode information
-OSD Languages-5
-User color settings
-USB Port: No
-USB hub option |
|
Warranty 3
| x |
Limited Warranty period and type: |
Three year Customer Carry-in Exchange |
Weight & Dimensions 6
|
|